Low Battery; Display And Key Functions; Features - Detecto 8450 Operation Manual

LOW BATTERY

When the battery is near the point it needs to be replaced, a low battery indicator
display will turn on. If the battery voltage drops too low for accurate weighing, the scale will
automatically shut off and you will be unable to turn it back on. When the low battery indicator
is displayed, the operator should replace the battery or remove the battery and plug-in the
9VDC adapter.
KEY FUNCTIONS:
ON/ZERO/OFF
1. Press this key to turn the scale on.
2. Press this key and hold for 2 seconds to turn the scale off.
3. Press this key with the scale on to zero the scale.
Kg / Lb
1. Press this key to toggle between kg and lb:oz.
2. In normal mode, press and hold this key for 3 seconds to enter Setup mode.
MEMORY
1. When weight value is stable, press this key to store the value.
2. If the weight is under 1kg, press this key to recall the stored value of weight.
3. If the weight value is over 1kg, press this key to add to stored value of weight.
4. Press MEMORY key again to return to original value.
5. In normal mode, press and hold this key 3 seconds to enter Compensation mode.
HOLD
1. When the power is on, the HOLD feature will automatically switch on and the arrow
at left bottom of LCD will flash.
2. When the weight is greater than 1% of capacity and stable, the arrow stops flashing
and the display locks.
3. To disable hold function, press ON/ZERO/OFF key again, and the arrow
disappears.
INSTALLATION, Cont.

DISPLAY AND KEY FUNCTIONS

FEATURES

3
on the