Auto-Timer Instructions; Setting The Auto-Off Timer - Danby DPAC7008 Owner's Manual

Auto-Timer Instructions:

The AUTO-TIMER feature offers a unique selection
of multiple choice, fully automatic on and/or off
(start/stop) programs between 0.5 - 24 hrs under
any one mode of your Home Comfort unit.
The programs are as follows:
a) Auto -Off: Pre-select a time that will turn off the
unit automatically (between 0.5 - 24 hrs.).
b) Auto-On: Pre-select a time that will turn on the
unit automatically (between 0.5 - 24 hrs.).
c) Auto-On & Auto-Off:Pre-select a time that will
turn the unit ON / OFF (automatically) at speci-
fied times (between 0.5 - 24 hrs).
Note: These functions must be performed daily, as
the program is automatically canceled/erased after
the program has ended .

Setting the AUTO-OFF TIMER

Before setting the AUTO-OFF timer, the unit must
be (operational) turned on.
1) Press the TIMER-OFF key pad ( Fig N) to ini-
tiate the AUTO-OFF time sequence. The "AUTO-
OFF" indicator ( Fig O) will illuminate on the con-
trol panel and the timer digits ( Fig P) will appear.
2) Continually depress the
settings forward by 0.5 hour increments (between
0.5 - 24 hrs).
3) The timer setting will remain in the display win-
dow for three seconds before automatically
reverting back to the temperature display.
4) To view the timer setting at any time; press the
TIMER-OFF key pad again and the timer
length you selected will be shown in the display
window.
• The unit will stop automatically at the specified
AUTO-OFF set time.
• NOTE: To cancel or override the AUTO-OFF
program, press the TIMER-OFF key to adjust
Timer-Off settings forward to 0.0 hours.
key to adjust Timer-Off
10
MOD