Table of Contents
Advertisement
VCD/CD/MP3/MPEG-4/USB/SD
06
Playing Discs/USB/SD
To play a disc, insert it labeled side up into
the disc loading slot. If the unit is off, loading
a disc will turn the unit on automatically.
When the disc is loaded, press the
25
MODE button to begin playback.
To play media on a USB device, remove
rubber inserts from the unit, plug the USB
device into the unit, and the playback will
begin automatically.
To play files on an SD Card, press
2
to release the front panel and insert the SD
card into the SD slot. Playback of the files
on the SD card will start automatically.
Note:
Pressing MOD on the main unit also performs
the same function as the
MODE button.
25
Playing the Previous or Next Track
During MP3/USB/MPEG-4/SD playback,
press
9
to play the previous track, press
to play the next track.
9
During VCD/CD playback, first press
9
to return to the beginning of the current track,
press
9
again within 3 seconds to play the
previous track, press
to play the next track.
9
Fast forwarding and Rewinding
Press
or
to play the track fast forward
20
or rewind. Each press changes the speed as
follows:
2X
4X
8X
16X
32
System Button
P/N on
During VCD playback, press
12
the remote to select standard TV system as
following:
AUTO
NTSC
PAL
Note:
* This function can also be operated by selecting
the DVD MENU SETUP.
Repeat Playing
16
RPT on the
During playback, press
remote, or AMS on the main unit to repeat
the current track. Press either button again
to cancel this function.
Note:
The default setting is Disc Repeat.
*
Playing Tracks
in
Random Order
During VCD/CD/MP3/MPEG-4/SD/USB
RDM on the remote to
playback,
press
17
have the unit play tracks in a random sequ-
ence. Press RDM again to return to normal
play.
Stoping Playback
While in MP3/MPEG-4/USB/SD mode, press
the stop button to stop playing. To resume
playing at the beginning of the stopped track,
press the stop button again.
During VCD/CD mode, first pressing
19
to pause playing, press
to play, press
18
button twice to stop playing completely.
Note:
* The Stop button on the unit performs the same
function as the stop button on the remote
control.
Installation
Inserting and Removing the Front Panel
Inserting
A
B
Put notch
(see below)
onto
shaft
.
And then gently press into the right side.
B
A
Note:
Never put any objects into the
front
panel.
02
Removing
Press the REL button on the upper
right
corner, and then fold down the front panel.
REL
When the front panel is turned down
to a position of 45 , hold and slide the
front panel left,
and then
pull it out .
13
Advertisement
Table of Contents
