Specifications - DP Audio Video DP318AP User Manual

VCD/CD/MP3/MPEG-4/USB/SD
06
Number Buttons
During playback, you can select any track
directly by using the number buttons on
the remote.
Setting Playback Duration
You can use the remote control to stop play-
back after a certain amount of time, which
some people may refer to as sleep function.
In CD mode, press 2 GOTO, and the display
shows : disc go to:--:--, press your desired
time of the playback by using number buttons.
Secondly press GOTO button, track go to
:--:-- appears on the display, also input your
desired numbers to play the current time of
your selection.
In VCD mode, press 2 GOTO button to set
the playing time, which will display :
track/disc time/track time/repeat/time
disp . Press [ ][ ] to select the options,
press ENTER to set the status.Then press
NUMBER BUTTONS or [ ][ ] to set
the current status.
In MP3/USB/SD mode, press 2 GOTO
first to display : ---/all track, input the
numbers to play the desired track. Press
second : --:-- to adjust the playing time.
In MPEG-4 mode, press GOTO first to
display : select:---, input the numbers to
play the desired track. Press GOTO seco-
ndly : time-:--:-- to adjust the playing time.
MO/ST Selector
During VCD playback, repeatedly press
AUDIO button on the remote control to
change audio channels in the following
sequence:
Mono right
Stereo
Mono left
34
Program Playing
While in VCD/CD mode, you can program
the playback sequence of your choice as
follows:
1. Press PROG on the remote to display the
program menu.
2. Use the number buttons to select tracks.
3. Press button to move the cursor to
START, then press ENTER to start playing
your sequence.
To stop playing your program, move the
cursor to EXIT and press ENTER.
You can always cancel the program by
pressing PROG or the stop button.
Using VCD Menus
Some VCDs are created with interactive
menus that allow you to play tracks in the
order of your choice, rather than simply
playing the whole disc through from the
beginning. Using the menu is a mode in itself
24
called PBC mode, which stands for playback
control.
To enter or exit PBC mode, simply press the
TITLE button. While viewing the disc menu,
use the number buttons to select a track, and
you can return to the VCD menu anytime by
2
pressing the MENU button on the remote.
Note:
VCD menus(or PBC) conforms version 2.0 of
*
SVCD/VCD disc only.
6
Before You Start

Specifications

General
Power requirement 14.4V DC
(11-16V allowable)
Load impedance
4
Max.power output
45W X 4
Tone controls 10dB
Bass 100Hz
Treble 10KHz
Approx.192 x 178 x50
Dimensions
mm (d/w/h)
Approx.169 X 182X53
Mounting
mm (d/w/h)
dimensions
Weight Approx.1.75kg
FM Tuner Section
87.5-108(MHz)
Tuning range
(Optional )
(Europe)
87.5-107.9(MHz)
(U.S.A.)
65-74(MHz)
Russia)
IF range 10.7MHz
Usable sensitivity 10dBuV
(-30dB)
Signal-to-noise ratio 60dB
Stereo separation
30dB 1KHz
Frequency response
30-15000Hz
01
AM Tuner Section
Frequency range
522-1620(KHz)
(Optional )
(Europe/Russia)
530-1710 (KHz)
(U.S.A.)
IF range
450KHz
Usable sensitivity 35dBuV
(-20dB)
CD Player Section
VCD signal system
PAL/NTSC
Signal-to-noise ratio
60dB
Separation 55dB(1KHz)
Distortion 0.1%
DVD Player Section
Number of channel 2 channels
Frequency response 5Hz to 20,000Hz
Dynamic range
98dB
Signal-to-noise ratio
60dB
Wow and flutter Less than
measurable limit
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
11