Important Safety Instructions, please Read Carefully! • This unit is meant to reproduce audio signals in 5.1- or stereo format. Using it in any other way warranty invalidates the warranty and you risk electric shock. • Never attempt to open the housings of your surround speaker set or to service the product beyond that described in this manual.
Scope of delivery 1. Remote control handset 2. Subwoofer / main unit 3. Centre speaker 4. Front speaker 5. Surround speaker 6. This manual 7. Speaker cable Setting up the system You can mount the speakers of your new home cinema system on a plane and stable surface.
Operating elements on the subwoofer on the front . . . 1. IR 2. STANDBY 3. OPERATE - infrared sensor, receives the remote control signals - standby indicator, lights up red in standby mode - operation indicator, lights up green during operation, flashed when the unit receives infrared signals.
. . . and on the rear panel 1) AUX INPUT Here you can connect stereo audio signals to the STEREO input (e.g. the audio output of a TV set or a CD player). 2) 5.1 CH INPUT Please connect here the input signal for the left front speaker. FR Please connect here the input signal for the right front speaker.
4) POWER ON/OFF Using this power switch you connect the unit to the mains and activate it. 5) AC IN - Power Cable Power cord for AC230V~ mains voltage. Hook up In order to avoid malfunctions and / or damage of the speakers or other connected devices, please establish all connections while the device is switched off.
Connecting the Speakers 1. Connect the left front speaker with the FL +/- terminals at the back side of the subwoofer. 2. Connect the right front speaker with the FR +/- terminals at the back side of the subwoofer. 3. Connect the right surround speaker with the SR +/- terminals at the back side of the subwoofer.
Page 9
1 STANDBY: Use this key to switch the unit on and off in stand-by mode, provided POWER switch on the subwoofer’s rear panel is in ON position (I). 2 SUB +/— : Push the + or — button, to adjust the subwoofer’s loudness.
Operating the Home Cinema Set 1. Set the mains switch (POWER) on the backside of the subwoofer to the ON position (I). The system is now in standby mode and the red pilot lamp (STANDBY) on the front side lights up. 2.
Technical Specification Output Power: Subwoofer Front Centre Surround Operating voltage: Dimensions: Subwoofer Satellite speakers 25 watts peak music output power 2 x 12,5 watts peak music output power 12,5 watts peak music output power 2 x 12,5 watts peak music output power AC230V~ / 50 Hz 160 (W) x 300 (D) x 300 (H) mm 90 (W) x 100 (D) x 115 (H) mm...