Fujitsu PRIMERGY TX2550 M5 Operating Manual page 63

To accommodate the ventilation concept and ensure proper ventilation, any
unused areas in the rack must be sealed using dummy covers.
The power is supplied via the multiple socket outlets fitted in the rack (not valid
for Japan).
The main features of Fujitsu rack systems are as follows:
– rail systems that can be mounted without tools
– support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
Asymmetrical PRIMECENTER rack and DataCenter rack provide an enhanced
cable management in the lateral rack area.
3rd party racks
I
Installation in most current rack systems from other manufacturers
(3rd party racks) is also supported. For details please contact your sales
representative.
– Wire the server. Read the information in section
server" on page 68
on page 67.
– Connect the system to the mains, see section
on page 69.
TX2550 M5
and section "Notes on connecting/disconnecting cables"
Operating Manual
Starting up
"Connecting devices to the
"Connecting the power cord"
63