One-Time Bypass - Viper 460XV Owner's Manual

When armed, your vehicle is protected as follows:
➤ Movement inside the passenger compartment will trigger
the system. The triggered sequence is 30 seconds of constant
siren and indicator light flashing.
➤
If a door is opened, the system will immediately trigger.
➤ Turning on the ignition key will trip the same two-stage
response as opening a door.
➤
The built-in triple circuit Immobiliser prevents the vehicle's
ignition, starter and fuel pump from operating.
➜

one-time bypass

This feature stops the alarm from arming or activating any
outputs that are programmed to activate when the alarm is
armed.
One-time bypass will defeat the following actions:
Passive arming: If programmed ON the alarm will not arm
itself.
If the remote is used to arm the alarm after exiting the vehicle:
Window roll up: If programmed ON this output will not
activate.
Linked Auxiliary Outputs: If programmed to activate on
arm, they will not activate.
© 2005 directed electronics, inc.
13