Arming The Vrs; Vrs® Triggered Sequence - Viper 460XV Owner's Manual

➜

arming the vrs

To arm the VRS
the arm button on the remote transmitter for one second. The
indicator lights will flash and the siren will chirp once. This can
be done before driving or while driving the vehicle. Once the
system is armed, it will initiate its triggered sequence (see below)
if any door is opened and closed. The system will now trigger au-
tomatically the next time you or anyone drives the vehicle. This
helps to protect the vehicle if someone takes your keys and remote
control.
note: If the VRS
cle and not disarmed prior to leaving the vehicle, it is still
armed and will trigger the next time the vehicle is driven.
➜
vrs ® triggered sequence
Fifteen seconds
LED will begin flashing. This delay is intended to allow you time to
distance yourself from your vehicle in the event of a carjacking.
Forty-five seconds later
cator lights begin flashing.
Fifteen seconds
change to a continuous blast.
From this point on, when the ignition key is turned off, the VRS
will immediately turn on the triple circuit immobiliser to prevent
the vehicle from being restarted.
© 2005 directed electronics, inc.
®
, turn the ignition to the ON position and press
®
system is armed while operating the vehi-
®
after the last door has closed, the system's status
, the siren begins chirping and the indi-
after the siren chirps begin, the siren's output will
®
29