IBM Power Systems 9008-22L Manual page 24

Figure 8. Inserting the front USB cable
4. Plug the USB cable (A) into the connector on the system backplane as shown in Figure 9. The USB
connector on the system backplane has the USB port symbol with an arrow pointing to the front of
the system.
Figure 9. Installing the front USB cable
5. Route the cable along the top right side of the system and secure it to the hook and loop fasteners on
the side of the system.
6. Replace the air baffles. For instructions, see "Replacing the air baffle in a 9008-22L, 9009-22A, or
9223-22H system" on page 31.
8
Front USB cable