IBM Power Systems 9008-22L Manual page 22

4. Unfasten the front USB cable from the hook and loop fasteners that secure the cable to the right side
of the chassis.
5. Unscrew the front USB holder from the chassis.
Figure 5. Removing two screws from the front USB holder
6. Pull out the front USB cable through the opening on the front of the system. Be careful to ensure that
the other end of the cable does not catch on any components as you remove it.
7. Press the latch releases (A) to disconnect the front USB cable from the front USB holder as shown in
Figure 6.
Figure 6. Removing front USB cable and socket from the front USB holder
6
Front USB cable