Avital Diablo 2 Owner's Manual page 8

Previous Intrusion Alert — If the vehicle had been tampered with
n
and the alarm has been triggered, the siren will chirp 3 times upon
remote disarm instead of the usual 1 chirp.
Specific Intrusion Identification — If the alarm had been triggered
n
in your absence, the siren will chirp 3 times upon remote disarm
(Previous Intrusion Alert). When you enter the vehicle and turn on the
ignition, the LED will flash in cycles to specifically identify which zone
triggered the alarm.
LED
One Flash...One Flash...
Two Flash...Two Flash...
Three Flash...Three Flash...
Automatic Malfunction Override — In the event of a faulty sensor
n
or alarm input trigger zone, the alarm, when remotely armed, will alert
you by a series of chirps and light flashes.
Instant Remote Control Code Deletion — In the event of a lost
n
or stolen remote control, all remote controls can be erased from memory
to prevent unauthorized alarm operation. See the "Programming Table
for Remote Controls" on pages 10 and 11.
Remote Control Code Learning — The alarm can be programmed
n
to accept as many as four separate remote controls. See the
"Programming Table for Remote Controls" on pages 10 and 11.
Alarm State Memory — If your car's battery is disconnected and
n
later reconnected, the system will automatically return to its last state
prior to disconnection, whether it was armed, disarmed or in the valet
mode. So if a mechanic disconnects the battery while the alarm is
disarmed or in the valet mode, he won't trigger the alarm when he
reconnects the battery. If a thief removes power while the alarm is armed,
and reconnects it, the alarm will instantly sound, the parking lights will
flash and the starter will be disabled.
Diablo
8
2
/AMX 68/AT-58 Owner's Manual 12/29/97
Triggered
Impact sensor
Hood trunk trigger
Door trigger