Protected Valet Mode - Avital AviStart 2501 Owner's Manual

To Activate
1 . While the vehicle engine is running with the ignition key turned "ON,"
press the green remote control START button for 1-2 seconds. The parking
lights will flash 2 times and stay on. (Make sure the vehicle is in "Park" and
the parking brake is set.)
2 . Turn the ignition key "OFF" and the engine will stay running.
3 . Remove the ignition key and remote control and exit the vehicle.
Remember to keep the ignition key and remote control in your possession
and lock the doors.
To Deactivate
Enter the vehicle (do not touch the brake pedal), turn the ignition key to the
"ON" position and then press the brake pedal. The parking lights will shut off
and you will now be able to drive the vehicle.

Protected Valet Mode

You should place your system in Protected Valet Mode whenever your vehicle
is being serviced by mechanics, car wash personnel or driven by valet parking
attendants. While in the Protected Valet Mode, all remote start functions are
bypassed to prevent unauthorized or accidental operation. If a remote start is
attempted, the parking lights will flash 4 times and the vehicle will not start.
To Turn on Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "ON" position.
3. Turn the ignition key to the "OFF" position.
To Turn off Protected Valet Mode
1 . Turn the ignition key to the "ON" position or start the engine.
2 . Flick the valet switch to the "OFF" position.
3. Turn the ignition key to the "OFF" position.
6
AviStart 2501 Owner's Manual