Using Your Freestyle; Telephone - BT Freestyle 70 User Manual

Using your
Freestyle 70

telephone

Making and receiving calls
To make a call
Press the buttons in the order shown:
Lift the handset off the base unit.
Press the
TALK
comes on. The
on the base unit flashes.
Listen for the dialling tone.
Dial the number you want.
KEYPAD
PLEASE NOTE
If you do not hear a dialling tone after pressing
the button, wait a few seconds. On a few
TALK
exchanges, there may be a delay.
To end a call
Press the
TALK
Or
Replace the handset on the base unit.
To receive a call
When the phone rings:
If your handset is on the base unit,
simply pick it up to answer the call.
Or
If your handset is off the base unit,
press the
TALK
call.
8
button. The light
TALK
light
POWER / IN USE
button.
button to answer the
PLEASE NOTE
The handset range is up to 200 metres from
the base unit in ideal conditions. If you start to
go out of range while using the phone, you will
hear warning beeps. If you do not come back in
range, your call will be disconnected.
PLEASE NOTE
An Inductive Coupler has been built into the
handset to improve sound quality for people
using hearing aids. Switch your hearing aid to
T and adjust the position of the handset until
you get the best reception.
To use the channel button
Your Freestyle 70 automatically scans
the available radio channels for quality
of reception, and selects the best one
to use.
If you experience interference during
your call, press the
to select a different channel.
To adjust the handset ringer volume
When the handset is not in use you
can adjust the ringer volume.
The handset ringer volume has
3 settings, HIGH, LOW and OFF.
To switch the ringer volume to OFF,
press and hold the
until you hear a confirmation beep.
The Freestyle 70 is pre-set to HIGH.
To change the volume on the handset
press and release the
On each press you will hear a sample
ring.
button
CHANNEL
button
VOLUME
button.
VOLUME