Paging The Handset - BT Freestyle 70 User Manual

Paging the handset

You can page the handset from the base unit to
let the handset user know they are wanted. You
cannot hold a conversation between the base
unit and the handset.
To page the handset
Press the
PAGE
unit. The handset will ring.
Please note, when the handset
ringer volume is set to
handset will not ring.
Your Freestyle 70 automatically returns
to standby after approximately one
minute.
You cannot page the handset while
it is being used on a call.
An incoming call will override a
page call and the handset will ring
To set the dialling mode
Press the
QUICKDIAL
standby mode.
Press the
Press for Tone dialling.
1
Press for Pulse dialling.
2
Press the
QUICKDIAL
the setting (you will hear a
confirmation tone).
If no instruction is received during
this process within 8 seconds, there
will be a beep and the process will
be cancelled before returning to
standby mode.
button on the base
the
OFF
as normal.
button during
button.
button to finish
To switch from Pulse to Tone dialling
during a call
If you are connected to a pulse dialling
exchange, you can still use services
such as phone banking that require
tone dialling.
Call the telephone number you require
KEYPAD
in pulse mode as usual.
When you have been connected, press
the button on the keypad to set
your telephone to tone dialling for the
duration of the call.
When you hang up, your Freestyle 70
will automatically switch back to pulse
dialling.
To insert a pause
With some switchboards, after dialling
the access code you may have to wait
for a moment while the switchboard
picks up an outside line. If so, press
the
REDIAL
before keying in the telephone number.
To use the recall button
You may need to use the
button if you are connected to a
switchboard/PBX (Private Branch
Exchange), contact your PBX supplier
for further information. The
button, when set to time break recall,
is also used for BT Select Services.
button to insert a pause
RECALL
RECALL
11