Environmental Specifications; Shock And Vibration; Table 2-1 Shock And Vibration - Western Digital Purple PR1000M Technical Reference Manual

PR1000M
2.5

Environmental Specifications

2.5.1
Table 2-1. Shock and Vibration
Shock
Operating
Non-operating (2 ms)
Note: Half-sine wave, measured without shock isolation and without non-recoverable errors.
Vibration
Operating
Non-operating
Sweep Rate
Drive Generated Vibration
Operating
Rotational Shock Non-Operating
Amplitude
Duration
Operating Vibration
Drives are tested by applying a random excitation in each linear axis, one axis at a
time. The drive incurs no physical damage and no hard errors while subjected to
continuous vibration not exceeding the level listed in Table 2-1. Operating
performance may degrade during periods of exposure to continuous vibration.
Non-Operating Vibration
Note: This specification applies to handling and transportation of unmounted drives.
Drives are tested by applying a random excitation in each linear axis, one axis at a
time. The drive incurs no physical damage when subjected to continuous vibration
not exceeding the level listed in Table 2-1.
Packaged Shock and Vibration
The shipping packaging is designed to meet the National/International Safe Transit
Association (N/ISTA) standards for packaged products. The drive incurs no physical
damage when subjected to the N/ISTA standards.
2679-800020-A03

Shock and Vibration

30G, 2 ms (read/write)
65G, 2 ms (read)
250G
Linear: 20-300 Hz, 0.75G (0 to peak)
Random: 0.004 g
Linear: 20-500 Hz, 4.0G (0 to peak)
Random: 0.05 g
0.5 octave/minute minimum
0.2 gm-mm average with the drive in an unconstrained condition
20K rad/sec
2 ms
RELEASED 5/8/17 (WD CONFIDENTIAL)
2
/Hz (10-300 Hz)
2
/Hz (10-300 Hz)
2
S
PECIFICATIONS
7