Sct Commands; B0H); Read Attribute Values Sub-Command; Table 4-4 Sct Action Codes - Western Digital Purple PR1000M Technical Reference Manual

PR1000M
4.1.4
SCT commands provide capabilities not covered in ATA/ATAPI-7 for commands that
do not fit the ATA command delivery model. Some SCT commands report completion
when the command begins execution. Execution progress for these commands may
be checked by requesting SCT status. For instance, the host can track the progress of
a Write Same command by issueing a status request once per minute. See ATA8-ACS
for a full description of SCT.
Table 4-4. SCT Action Codes
4.2 S.M.A.R.T. (B0h)
The S.M.A.R.T. command provides access to attribute values, S.M.A.R.T. status, and
other S.M.A.R.T. information. These commands can be used for logging and reporting
purposes, and for accommodating special user needs.
Prior to writing the S.M.A.R.T. command to the Command Register, the host must
write key values into the LBA Mid and LBA High Registers (4Fh, C2h) or the command
will be aborted and an error will be reported.
The S.M.A.R.T. command has several sub-commands that are selectable via the
Features Register when the host issues the S.M.A.R.T. command. To select a sub-
command, the host must write the appropriate sub-command code to the Features
Register before issuing the S.M.A.R.T. command. The sub-commands and their
respective codes are listed below. For more detailed information on executing
S.M.A.R.T. commands, see the ATA-7 specification.
4.2.1
This command returns a sector of data with the drive's S.M.A.R.T. data structure.
Table 4-5. Definitions for the 512 Bytes.
BYTE
0 - 1
2 -361
135 - 361
362
363
2679-800020-A03

SCT Commands

ACTION CODE
0000
H
0001
H
0002
H
0004
H
0005
H
0006
H
0007
H
C000
H

Read Attribute Values Sub-Command

VALUE
0001
H
XX
XX
XX
XX
RELEASED 5/8/17 (WD CONFIDENTIAL)
DESCRIPTION
RESERVED
O
W
F
EATURES
SCT D
V
ENDOR SPECIFIC
SCT BIST
FFFF V
H
DESCRIPTION
S.M.A.R.T. Data Structure Revision
S.M.A.R.T. Attribute Data
S.M.A.R.T. Attribute Data
Offline data collection status
0Xh OL disabled
8Xh OL enabled
X0h scan not run
X2h scan complete
X4h scan suspended
X5h scan aborted
Self-Test execution status byte.
ATA C
OMMAND
BSOLETE
S
RITE AME
C
ONTROL
T
ATA ABLES
ENDOR SPECIFIC
S
ET
27