Western Digital Purple PR1000M Technical Reference Manual page 38

ATA C S
OMMAND ET
BYTE
364 - 365
366
367
368 - 369
370
371
372
373
374
375 - 510
511
28
VALUE
00h
01h
02h
03h
04h
05h
06h
07h
08h
09-
0Eh
0Fh
XX
Total time in seconds to complete offline data collection activity
XX
Reserved
07B
H Offline data collection capability. Bits are as follows:
0
1
2
3
4
5
6-7
0003
H S.M.A.R.T. Capability. Bits are as follows:
0
1
2-15
01
H Error logging capability. Bits are as follows:
0
1
XX
Reserved
XX
Short self-test routine completion time in minutes
XX
Extended self-test routine completion time in minutes
XX
Conveyance self-test routine completion time in minutes
XX
Reserved
XX
Checksum
RELEASED 5/8/17 (WD CONFIDENTIAL)
DESCRIPTION
The previous self-test routine completed without error or
no self-test has ever been run
The self-test routine was aborted by the host
The self-test routine was interrupted by the host with a
hard or soft reset
A fatal error or unknown test error occurred while the
device was executing its self-test routine. The device
was unable to complete the self-test routine.
The previous self-test completed having a test element
that failed. The test element that failed is not known.
The previous self-test completed having a test element
that failed. The electrical element of the test failed.
The previous self-test completed having a test element
that failed. The servo (and/or seek) test element of the
test failed.
The previous self-test completed having a test element
that failed. The read element of the test failed.
The previous self-test completed having a test element
that failed. The element damage is suspected to be
caused by handling.
Reserved
Self-test routine in progress
1 = Offline Immediate Command supported
1 = Auto Offline enable\disable command supported
0 = Offline will suspend on and will resume after host
command
1 = Offline read scan implemented
1 = DST Short and Extended tests supported
1 = DST Conveyance test supported
0 - Reserved
1 = The device saves SMART data prior to going into a
power saving mode
1 = Device complies with SMART data autosave after an
event
Reserved
1 = Error logging supported
Reserved
PR1000M
2679-800020-A03