Using Mac Filtering - D-Link AirPremier DWL-2210AP Manual

Controlling Access by MAC Address Filtering

Using MAC Filtering

This page allows you to control access to D-Link DWL-2210AP based on Media
Access Control (MAC) addresses. Based on how you set the filter, you can allow only
client stations with a listed MAC address or prevent access to the stations listed.
For the Guest interface,
On a two-radio AP, MAC Filtering settings apply to both radios.
Field
Field Description
Filter To set the MAC Address Filter, click one of the following radio buttons:
• Allow only stations in the list
• Allow any station unless in list
Stations List
To add a MAC Address to Stations List, enter its 48-bit MAC address into
the lower text boxes, then click Add.
The MAC Address is added to the Stations List.
To remove a MAC Address from the Stations List, select its 48-bit MAC
address, then click Remove.
The stations in the list will either be allowed or prevented from accessing
the AP based on how you set the Filter.
Updating Settings
To apply your changes, click Update.
MAC Filtering settings apply to both BSSes.
Description
92 92