Radius Server - D-Link DWL-1000AP+ Manual

Using the Configuration Menu
Advanced > 802.1x
Disabled
is the default selection for 802.1x protocol. Select
Encryption Key:
Lifetime:
Select 5, 15, 30 minutes, or 1or 8 hours, or 1 day for the authentication
period. After this period expires, a new key will automatically be generated.

Radius Server 1

IP:
Enter the IP Address of the Radius Server
Port:
Enter the port number that your Radius Server uses for
Authentication.
Radius Servers
Shared Secret:
same as the shared secret on your radius server.
Radius Server 2:
same information as shown above.
Select the key length, either 64 bits or 128 bits.
The default setting of 1812 is the port setting for many
Enter the Shared Secret. The shared secret must be the
Optional. If you have a second radius server, you will input the
Enabled to enable it.
19