D-Link DP-101P+ User Manual page 49

Assigning a Static IP Address
Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the
network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable
Gateway/Router you will not need to assign Static IP Addresses.
If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these
instructions:
• Go to Start
• Click on Control Pane
Networking Basics
Assigning a Static IP Address
• Click on Network Connections
49