D-Link DP-101P+ User Manual page 34

Configuration > TCP/IP Protocol
Click on "TCP/IP Protocol" in the Configuration Table. The page will appear as below providing the settings
required to configure the print server. Click the "Save" button to ensure the settings are saved and updated.
IP Address Assignment:
Manually assign:
Assign Automatically Using: Select one of the three protocols to be used to receive an IP Address
SNMP:
Select this option to enter a specific IP Address to the print server. Enter the IP
Address in the above fields.
Automatically.
The print server supports Simple Network Management Protocol (SNMP) using
MIB II.
34