Table of Contents
Advertisement
CAUTION! Do not use alcohol,
solvents or chemical products.
DESCALING
If the water hardness in your area is high or
moderate, we recommend that you use a water
descaling product for washing machines.
Regularly examine the drum to prevent limescale
and rust particles.
To remove rust particles use only special products
for washing machines. Do this separately from the
laundry wash.
Always obey the instructions that you
find on the packaging of the product.
MAINTENANCE WASH
With the low temperature programmes it is possible
that some detergent stays in the drum. Perform a
maintenance wash regularly. To do this:
•
Remove all laundry from the drum.
•
Select the cotton programme with the highest
temperature with a small quantity of detergent.
DOOR SEAL
CLEANING THE DETERGENT DISPENSER
Clean regularly the washing powder and additive
dispenser drawer.
To clean the detergent drawer it is necessary to
remove it from its site.
14
Regularly examine the
seal and remove all ob-
jects from the inner part.
Open the drawer.
CLEANING THE DRAIN FILTER
The pump should be inspected regularly and
particularly if:
•
the appliance does not empty and/or spin;
•
the appliance makes an unusual noise during
draining phase due to objects such as safety
pins, coins and so on blocking the pump;
•
a problem with water draining is detected (see
chapter 'Troubleshooting' for more details).
CAUTION! Switch the appliance off
and remove the mains plug from the
socket.
Proceed as follows:
•
Unplug the appliance.
Press the catch down-
wards as described in the
graphic and pull it out.
Remove the top part of
the additive compartment
to aid cleaning.
Flush it out under a tap, to
remove any traces of ac-
cumulated powder.
Make sure that all washing
powder residue is re-
moved from the upper and
lower part of the recess.
Use a small brush to clean
the recess.
Close the drawer and run
the rinse programme with-
out any clothes in the
drum.
Hide quick links:
Advertisement
Table of Contents
