Hardware Installation - D-Link MediaLounge DSM-622H User Manual

Hardware Installation

1 1 1 1 1
Connect the power adapter to the
connector on the back panel of the
DSM-622H/624H. Then plug the
other end of the power adapter into
a wall outlet or power strip. The
Power LED will be ON to indicate
proper operation.
2 2 2 2 2
Connect an Ethernet cable to the
Ethernet jack located on the back of
the DSM-622H/624H.
3 3 3 3 3
After the Ethernet cable is securely
connected, connect the other end of
the Ethernet cable to your network
router or switch. (The router is
pictured here.)
4 4 4 4 4
The antenna is removable and can be
screwed on or off.
8