Table of Contents
Advertisement
Hardware Installation
A.
First, connect the power
adapter to the connector
on the back panel of the
DSM-
604H. Then
602H/
plug the other end of the
power adapter into a wall
outlet or power strip. The
Power LED will be on to
indicate proper operation.
B.
Connect an Ethernet
cable to the Ethernet jack
located on the back of
the DSM-
602H/
C.
After the Ethernet cable
is securely connected,
connect the other end of
the Ethernet cable to your
network router or switch.
604H.
4
Advertisement
Table of Contents
