Table of Contents
Advertisement
Using the Configuration Utility (continued)
Save:
Click to save the
system settings to a local
hard drive.
Browse:
Click to browse the
hard drive for the DSM-622H/
624H settings.
Load:
Click to load the
selected settings onto the
DSM-622H/624H.
Restore:
Click to restore to
factory default settings.
Restart:
Click to restart the
device.
Click here to check for any
new firmware upgrade on
our support site:
this link to find information
about firmware upgrades on
D-Link's support site.
Download the firmware
upgrade from the support
site to your computer's hard
drive.
Browse:
After you have
downloaded the firmware
upgrade to your hard drive,
click Browse to find the
upgrade. When you have
found it, click Open in the
browser window and click
Apply in this screen to begin
the firmware upgrade.
When the upgrade is complete, a message will appear and the DSM-622H/624H will
restart itself.
Tools > System
Tools > Firmware
Click on
18
Advertisement
Table of Contents
