Hardware Installation - D-Link DSM-622H Quick Installation Manual

Hardware Installation

A. Connect an Ethernet
cable to the Ethernet
jack located on the back
of the DSM-622H/624H.
B. Connect the antenna to
the antenna connector
located on the back of
the DSM-622H/624H.
c. Connect the power
adapter to the connector
on the back panel of the
DSM-622H/624H. Then
plug the other end of the
power adapter into a wall
outlet or power strip. The
Power LED will be on to
indicate proper operation.
d. After the Ethernet cable
is securely connected,
connect the other end of
the Ethernet cable to
your network router or
switch.
4