Table of Contents
Advertisement
Getting started
Location
You need to place your BT Diverse 6110 base station
close enough to a mains power and telephone socket so
that the cables will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Diverse 6110 works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.
Setting up
1. Plug the mains power adaptor into the power socket on
the underside of the base. Plug the other end into the
mains socket. The Power/In Use and message indicator
lights up.
BT Diverse 6110 ~ Issue 2 ~ Edition 1 ~ 06.04.05 ~ 6794
Power adaptor cable
WARNING
Do not place your BT Diverse 6110
base in the bathroom or other
humid areas.
Handset range
The BT Diverse 6110 has a range
of 300 metres outdoors when there
is a clear line of sight between the
base and the handset. When there
is no clear line of sight between the
base and the handset, e.g. base
indoors and handset either indoors
or outdoors, the range could be
reduced to 50 metres. Thick stone
walls can severely affect the range.
Signal strength
The
symbol on your handset
screen indicates when you are in
range. When you are out of range,
it flashes and the screen displays
OUT OF RANGE and there is a beep.
IMPORTANT
Do not connect the telephone line
until at least one of the handsets is
fully charged.
The base station must be plugged
into the mains power at all times.
Which socket?
Power socket
Telephone line socket
7
Advertisement
Table of Contents
