Angle/Height Measure; Measuring At One Listening Position (Single Measure) - Yamaha RX-V3085 Owner's Manual

MAIN 2 3 4 MAIN 2 3 4
SLEEP SLEEP ZONE ZONE
PARTY T T PARTY
PURE DIRECT PURE DIRECT HDMI OUT HDMI OUT
SCENE SCENE
1 1 2 2 3 3 4 4
5 5 6 6 7 7 8 8
INPUT INPUT
TUNER TUNER NET NET USB USB BLUETOOTH BLUETOOTH
PRESET PRESET
RED RED GREEN GREEN YELLOW YELLOW BLUE BLUE
Cursor keys
ENTER
RETURN
TOP TOP POP-UP POP-UP
HOME HOME
MENU MENU / / MENU /MENU
AI AI
SUR. DECODE SUR. DECODE
PROGRAM PROGRAM VOLUME VOLUME
ENHANCER ENHANCER
STRAIGHT STRAIGHT
MEMORY MEMORY
TUNING TUNING BAND BAND TUNING TUNING

Angle/Height Measure

Enables/disables the angle/height measurement.
Settings
Enables the angle/height measurement. The unit will
measure angle of each speaker and height of the presence
Checked speakers at the listening position, and correct the speaker
parameters so that CINEMA DSP can create more effective
sound fields.
Unchecked
Disables the angle/height measurement.
(default)
Measuring at one listening position
(single measure)
Follow the procedure below to take a measurement when the "Multi
Measure" box is unchecked. It takes about 5 minutes to perform the
measurement.
Y
• If any error message (such as ERROR 1) or warning message (such as WARNING 1)
appears, see "Error messages" (p.64) or "Warning messages" (p.65).
• Do not use the microphone base until the corresponding message appear on the TV.
1
To start the measurement, use the cursor keys to select
"Start" and press ENTER.
The measurement will start in 10 seconds. Press ENTER again to
start the measurement immediately.
X
To cancel the measurement temporarily, press RETURN or VOLUME keys.
The following screen appears on the TV when the measurement
finishes.
(when angle/height measurement is disabled)
Proceed to Step 3.
57
En