Yamaha RX-V3085 Owner's Manual page 142

Musiccast
Hide thumbs Also See for RX-V3085:
Table of Contents

Advertisement

HDMI Control
Configures the HDMI control settings.
HDMI Control
Enables/disables HDMI Control (p.182).
Settings
Off
Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "ARC" and "Standby Sync".
Y
To use HDMI control, you need to perform the HDMI Control link setup (p.182) after connecting HDMI
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI Control" is set
to "On". The unit's input source automatically switches to TV audio when the TV input is
switched to its built-in tuner.
Settings
AUDIO 1-3
Y
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an
external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.184) when "HDMI Control" is set to "On".
Settings
Off
Disables ARC.
On
Enables ARC.
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the
unit because TV audio signals input to the unit via ARC are not supported by the unit, set "ARC" to "Off" and use
the TV's speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when
"HDMI Control" is set to "On".
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the unit is
Auto
receiving TV audio or HDMI signals.
HDMI Audio Output
Selects whether the HDMI sound is output from the TV speakers.
X
The "HDMI OUT1" setting is available only when "HDMI Control" is set to "Off".
HDMI OUT1, HDMI OUT2, HDMI ZONE OUT
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack, HDMI OUT 2
jack or HDMI ZONE OUT.
Settings
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
HDMI ZONE OUT Assign
Select the zone for which the HDMI OUT 3 (ZONE OUT) jack is used.
Settings
Zone2, Zone4
X
For details on audio signals that can be output to each zone, see "Multi-zone output" (p.182).
142
En

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx-v2085

Table of Contents