KTM 1290 Super Adventure S 2018 Owner's Manual page 302

22 TROUBLESHOOTING
Faults
The engine does not turn if the
emergency OFF switch/electric
starter button is pressed into
the lower position
Engine turns only if the clutch
lever is drawn
Engine turns although a gear is
engaged
Engine turns but does not start
Engine dies during the trip
300
Possible cause
Operating error
The battery is discharged
Safety start system is faulty
Electronic fault
The vehicle is in gear
Safety start system is faulty
Safety start system is faulty
The plug-in connection of the
fuel hose connection is not
connected
Fault in fuel injection system
Fuel quality is insufficient
Lack of fuel
Fault in fuel injection system
Action
–
Carry out the start procedure.
( p. 153)
–
Recharge the battery. (
–
Check the open-circuit current.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Shift the transmission to idle
–
Read out the fault memory using the
KTM diagnostics tool.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Connect the plug-in connection of the
fuel line.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Add suitable fuel.
–
Refuel. ( p. 172)
–
Read out the fault memory using the
KTM diagnostics tool.
p. 255)
.