Table of Contents
Advertisement
10 RIDING INSTRUCTIONS
Note
Transmission damage Incorrect use of the quickshifter+ will damage the transmission.
The quickshifter+ can only be used if the function is enabled in the combination instrument.
The quickshifter+ is not active if you pull the clutch lever.
–
Only use the quickshifter+ in the permitted speed range shown.
162
Info
If you hear unusual noises while riding, stop immediately, switch off the engine, and contact an autho-
rized KTM workshop.
402299-11
–
Shift into a higher gear when conditions allow (incline, road
situation, etc.).
–
Release the throttle while simultaneously pulling the clutch
lever, shift into the next gear, release the clutch lever, and
open the throttle.
Info
You can see the positions of the 6 forward gears in the
figure. The idle position is between the first and sec-
ond gears. First gear is used for starting off or for steep
inclines.
–
After reaching maximum speed by fully opening the throttle
grip, turn the throttle back so it is ¾ open. This will barely
Advertisement
Table of Contents
