Lexmark B2338 User Manual page 49

Understanding the printer menus
HTTP/FTP Settings
Note: This menu appears only in network printers or printers attached to print servers.
Menu item
Enable HTTP Server
Off
On*
Enable HTTPS
Off
On*
Enable FTP/TFTP
Off
On*
HTTP Default IP Port
1–65535 (80*)
HTTPS Device Certificate
FTP Default IP Port
1–65535 (21*)
Timeout for HTTP/FTP
Requests
1–299 (30*)
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off
Mac Binary PS
Auto*
On
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Access the Embedded Web Server to monitor and manage the printer.
Configure the HyperText Transfer Protocol Secure (HTTPS) settings.
Send files using FTP.
Configure the HTTP and FTP server settings.
Specify the time in seconds before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Description
Set the printer to switch to PCL emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch to PS emulation when a print job received through a
USB port requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
49