D-Link DGS-3024 User Manual page 76

To set up the Switch's 802.1x port-based authentication, select which ports are to be configured in the From and To fields.
Next, enable the ports by selecting Authenticator from the drop-down menu under Capability. Click Apply to let your
change take effect.
Configure the following 802.1x capability settings:
Parameter Description
From and To
Capability
DGS-3024 Gigabit Ethernet Switch Manual
Figure 6- 45. 802.1x Capability Settings window
Ports being configured for 802.1x settings.
Two role choices can be selected:
Authenticator - A user must pass the authentication process to gain access to the
62