D-Link DGS-3024 User Manual page 28

Area 3
DGS-3024 Gigabit Ethernet Switch Manual
mode, or flow control, depending on the specified mode.
Various areas of the graphic can be selected for performing management functions,
including port configuration.
Presents switch information based on your selection and the entry of configuration
data.
NOTICE: Any changes made to the Switch configuration during the
current session must be saved in the Save Configuration window
(Maintenance → Save Changes) or use the command line interface (CLI)
command save.
NOTE: Be sure to configure the user name and password in the User
Account Management window (Management → User Accounts) before
connecting the Switch to the greater network.
14