D-Link DGS-3024 User Manual page 32

GVRP
Link Aggregation
Algorithm
Switch 802.1x
Syslog Global State
DGS-3024 Gigabit Ethernet Switch Manual
This indicates if Group VLAN Registration Protocol (GVRP) is enabled on the switch.
GVRP is a protocol that allows members to dynamically join VLANs. The switch's
GVRP settings can be changed on the GVRP Settings window (Configuration →
VLANs → GVRP Settings).
The algorithm that the Switch uses to balance the load across the ports that make up
the port trunk group is defined by this definition. Choose MAC Source, MAC
Destination, or MAC Src & Dest, (For further information, see the Link Aggregation
section, under the Link Aggregation folder).
The Switch's 802.1x function may be enabled by port; the default is Disabled. This field
must be enabled to view and configure certain windows for 802.1x. More information
regarding 802.1x, its functions and implementation can be found later in this section,
under the Port Access Entity folder. Port-Based 802.1x specifies that ports configured
for 802.1x are initialized based on the port number only and are subject to any
authorization parameters configured.
This allows you to enable or disable the System Log Global State.
18