Operation - Ryobi P2800 Operator's Manual

WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
CONNECTING THE SPRAY WAND TO THE
HANDLE
See Figure 2.
 Insert the spray wand into the the handle as shown.
 Slide the o-ring down until it touches the handle.
 Thread the cap onto the handle and tighten securely.
 Rotate the nozzle until it is aligned with the handle (pointing
down) and ready for use.
 Slide the nut onto the cap and tighten securely.
 Pull on the spray wand to be certain it is properly secured.
 Place the assembled handle into the handle storage area.
WARNING:
Do not allow familiarity with the product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields or goggles
marked to comply with ANSI Z87.1. Failure to do so could
result in fluids entering your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.
ASSEMBLY
ATTACHING THE HOSE
See Figures 3 - 4.
To attach the hose to the tank:
 Slide the nut on the hose away from the hose end.
 Insert the hose end into the opening on the tank as shown.
Make sure the connection is secure.
 Slide the nut over the opening and hose end. Hand tighten.
Do not overtighten.
To attach the hose to the handle:
The hose comes preassembled to the handle. If it becomes
loose, follow the instructions below.
 Thread the cap onto the handle and tighten securely.
 Slide the nut on the hose away from the hose end.
 Insert the hose end into the opening on the cap. Make
sure the connection is secure.
 Slide the nut over the hose and cap. Hand tighten. Do
not overtighten.

OPERATION

Use safety equipment. Protect your eyes, skin, and lungs
while mixing, filling, spraying, and cleaning. Failure to do
so may result in serious personal injury and damage to
property.
NOTICE:
Before each use, inspect the entire product for damaged,
missing, or loose parts such as screws, nuts, bolts,
caps, etc. Tighten securely all fasteners and caps and
do not operate this product until all missing or damaged
parts are replaced. Please contact customer service or
a qualified service center for assistance.
APPLICATIONS
You may use this product for the purpose listed below:
 For use with most consumer grade home and garden
chemicals, such as insecticides, fungicides, weed killers,
and fertilizers
7 — English
WARNING: