Getting To Know Your Router; Front Panel - Belkin N150 User Manual

gETTing TO KnOW YOUR ROUTER

front panel

Your router's status is shown by the lights on the front panel.
power light
Off: the router is powered off.
solid green: intialization of the router is successful.
solid Red: the router is self-testing, or self-testing is
failed, or software upgrade is under progress.
modem light
solid green: Connection between the router and the
physical layer of the office is established.
slow blinking green: No signal is being detected.
fast blinking green: the router is handshaking
with the physical layer of the office.
internet light
Off: the router is in bridged mode, or no data is transmitted via a WAN port.
blinking green: data is being transmitted in routing mode or bridged mode.
solid Red: the internet connection fails after successful
synchronization in routing mode (for example: PPP dial-up is failed).
lan light
Off: lAN connection is not created.
blinking green: lAN data is being transmitted, or internet
data is being transmitted in bridged mode.
solid green: lAN connection is established and activated.
Wlan light
Off: WlAN is disabled.
blinking green: Wireless data is being transmitted in the WlAN.
solid green: WlAN is enabled but no data is transmitted.
Wi-fi protected setup (Wps) light
Off: idle
blinking green: the router is listening for a WPs-
enabled computer or other device.
successful Connection: the WPs light is solid GreeN
for 5 minutes and then goes out when the router has made a
secure connection with the computer or other device.
failed Connection: the WPs light is BliNKiNG GreeN for 2
minutes and 30 seconds after the WPs connection fails.
8