17. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
17.1 Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor
Removal Procedures
17.1.1
To Remove Front Grille
17.1.2
To Remove Power Electronic Controller
AMP Air Conditioning
2 Remove 2 caps and 3 screws at the
bottom of discharge vane.
Figure 1
Hook
Figure 2
WARNING
3 Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1 Lift to open the horizontal vane
gently.
100
www.ampair.co.uk | sales@ampair.co.uk
4 Removing the control
board cover by
releasing the hook.