Show Dot1X Advanced - D-Link DES-3010GA Cli Manual

show dot1x advanced

The show dot1x advanced Privileged EXEC mode command displays 802.1X advanced features for the device
or specified interface.
Syntax
show dot1x advanced [ethernet interface]
Parameters
•
interface — Valid Ethernet port. (Full syntax: port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays 802.1X advanced features for the device.
Console# show dot1x advanced
Guest VLAN: 2
Unauthenticated VLANs: 91,92
Interface
---------
1
2
Console# show dot1x advanced ethernet 1
Interface
---------
1
Single host parameters
Violation action: Discard
Trap: Enabled
Multiple Hosts
--------------
Disabled
Enabled
Multiple Hosts
--------------
Disabled
Page 340
802.1x Commands
Guest VLAN
----------
Enabled
Disabled
Guest VLAN
----------
Enabled