Switchport Private-Vlan - D-Link DES-3010GA Cli Manual

switchport private-vlan

The switchport private-vlan Interface Configuration command configures private-vlan port VLANs. To return to
the default configuration, use the no form of this command.
Syntax
switchport private-vlan promiscuous pvlan
no switchport private-vlan promiscuous
switchport private-vlan isolated pvlan
no switchport private-vlan isolated
switchport private-vlan community cvlan
no switchport private-vlan community
•
pvlan — Specifies the ID of the primary VLAN.
•
cvlan — Specifies the ID of the community VLAN.
Default Configuration
The port is not a member of a PVLAN.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
•
The community VLAN should be associated with the primary VLAN by using the switchport access vlan
Interface Configuration mode command.
Example
This example configures private VLAN 200 as the primary private VLAN and associates it with promiscouous pri-
vate VLAN Ethernet port 5.
Console# config
Console(config)# vlan database
Console(config-vlan)# vlan 200
Console(config-vlan)# exit
Console(config)# interface vlan 200
Console(config-if)# private-vlan primary
Console(config-if)# exit
Console(config)# interface ethernet 5
Console(config-if)# switchport private-vlan promiscuous 200
Page 296
VLAN Commands