D-Link SECURICAM Network DCS-5300W Manual page 8

Connections (continued)
Infrared Remote Control
Included with the DCS-5300W is an infrared remote control. You have the option
of controlling the camera via the Pan/Tilt Controls using the IP surveillance
software, Internet Explorer, or via the infrared remote. To use the remote, make
sure that IR Control is enabled on the Camera Control page in the Configuration
Menu under Advanced. Please refer to the section titled "Using the DCS-
5300W with an Internet Browser" in this manual for more information.
Auto-Pan
Auto-Patrol
Stop
Arrows -
Home-
Auto-Patrol-
Auto-Pan-
Center-
Stop-
Use the Up, Down, Left and Right arrows to tilt/
navigate the camera lens.
Returns the camera lens to the home position set
by the user.
Enables the Auto-Patrol function.
Pans the camera one full cycle.
Centers the camera lens.
Stops the movement of the camera during pan.
8
Arrows
Home
Center