D-Link SECURICAM Network DCS-5300W Manual page 108

Using IP surveillance Software (continued)
Scheduling (continued)
There are three modes in the secondary schedule: Disable, Event mode, and
Continuous mode. You can either disable the secondary schedule or choose
the event or continuous mode. These two modes are the same as the primary
schedule. Please refer to the previous section for more detail.
The Schedule Scheme operations
There are six related buttons. "Load...", "Undo", "Clear", "Save", "Save as..."
and "Close" for handling the schedule schemes. These operations are shown
in the figure below.
Load...
This button allows you to load pre-edited schedules from the
scheduling directory for the selected video channel. Note that
you should save the schedule you are currently working on before
loading a new one. Otherwise, the current changes will be lost.
Clear
This button will clear all changes in the current schedule of the
selected video channel.
Save
This button is used for saving changes to the current schedule.
Save As...
This button is used to save the current schedule as another file
name instead of the default name.
Undo
Click on this button to undo all changes for the current schedule
since the last save.
Close
Click on this button to close the scheduler.
108