Http Settings - D-Link Securicam Network DCS-2000 Manual

Using the DCS-2000 with an Internet browser
(continued)
Primary FTP Passive
Mode-
2nd FTP server -
2nd FTP user name -
2nd FTP password -
2nd FTP remote folder -
Secondary FTP passive
Mode -

HTTP Settings

HTTP Port-
Click Apply to make
changes effective
If the DCS-2000 is located inside the network
protected by firewall, a data connection for FTP
may be prohibited. Passive mode FTP can bypass
the rule and succeed to upload snapshots. If the
passive mode is selected, the DCS-2000 can
automatically attempt for an active mode if the
external FTP server does not support passive
mode.
The domain name or IP address of the external
FTP server. Note that the 2nd FTP server will only
be used if the 1st FTP server is unavailable. If
the image upload to the 1st FTP server is
successful, no attempts will be made to connect
to the 2nd FTP server.
Granted user name on the backup FTP server.
Granted password on the backup FTP server.
Granted folder on the backup FTP server.
Passive mode setting for the backup FTP server.
Can be set to other than the default port 80. When
the administrator changes the HTTP port of the
DCS-2000 (which has an IP Address of
192.168.0.100) from 80 to 8080, users must type
"http://192.168.0.100:8080" in the Web browser
instead of "http://192.168.0.100".
39