Samsung Wisenet SNK-B73040BW User Manual page 24

NVR Menu
Motion
Go to "Main Menu" ; "Parameter" ; "Alarm" ; "Motion" to enter into the interface.
• Channel: Select Channel.
• sensitivity: Support 1-8 level, 8 is the highest level.
• Buzzer: When detecting object moving, buzzer makes alarms (disable, 10
seconds, 20 seconds, 40 seconds and 60 seconds).
• show Message: Messages will be displayed on the screen when moving
object is detected and alarms are made.
• send email: When moving object is detected, send Email to the specified
Email address.
• full screen: When moving object is detected, messages will be displayed in
full screen.
• post recording: After the alarm finishes, the duration time of the alarm
recording can be set as 30 seconds, 1 minute, 2 minutes and 5 minutes.
• Area: Click it to enter into the interface to set the motion detection area to be
monitored intensively.
A single channel is divided into 6x8 configurable grids. The red grids indicate
that the motion detection in the area is enabled, white semitransparent ones
indicate that the motion detection in the area is disabled. After setting is
completed, right click the mouse button to return and click Save to make the
parameter setting effective.
• record Channel: When object motion is detected, the record channel
setting will be activated.
Alarm Type
Video Loss
Motion Detection
HDD Status
24_ NVR Menu
When the NVR fails to receive video signals due to some problems (camera damage,wireless signal is weak, power failure),
the alarm will appear.
When camera detects object moving, alarm will be activated. Sensitivity is subject to the actual application environment
test. Sensitivity is adjusted according to the sensitivity of moving object detection and parameters are modified by
combining the area setting.
Alarm will appear when the HDD does not work due to damage, power failure, HDD auto-overwrite off and insufficient
space.
Functions & Descriptions