Samsung Wisenet SNK-B73040BW User Manual page 33

Advanced
Maintain
Go to "Main Menu" ; "Advanced" ; "Maintain" to enter into the interface.
• default user: Set a user as default user or turn default user off.
• Auto reboot: Enable the auto maintenance function to reboot system
regularly at every day/week/month. When Auto Reboot is enabled, NVR
should be in the main interface and no user operation.
• update: Click Update to enter the Device interface and select the updating
file in USB to execute.
• load default: If [Load Default] is selected, you can initialize the system to
the ex-factory default. Click "Load Default" and select items to be restored.
You can restore the color settings, motion detection on/off, motion detection
sensitivity and motion detection area of wireless camera to ex-factory default.
• load settings: Load parameters in the removable storage device to NVR.
• save settings: Save the set parameters of user's NVR to the removable
storage device.
• Camera upgrade: Click to do firmware upgrade of Wireless Camera.
Do not take out the USB memory or cut off the power during upgrading. When the update is done, system will be automatically restarted. After
`
M
about 5 minutes, the upgrading will be finished. It is recommended to load ex-factory default after upgrading. The auto maintain function can be
effective only when NVR returns back to Preview mode with no any operation within the set auto maintain time.
events
Go to "Main Menu" ; "Advance" ; "Events" to enter into the interface.
• event type: Support three abnormal types: Disk Full, Disk Error and Video
Loss.
• enable: Active alarms for abnormal situations.
• show Message: You can set show message on the screen when alarm is
detected.
• Buzzer: How long the buzzer will sound (10s, 20s, 40s, 60s).
• send email: Select to send Email to specified Email address when abnormal
events appear.
shutdown
Go to "Main Menu" ; "Shutdown" to enter into the interface.
English _33