Denon AVR-X4500H Owner's Manual page 267

Contents Connections
1
Press and hold down the input source button that you
want to register the preset code to and SETUP until the
DEV., TV and AVR indicators are flashing green.
2
Enter the preset number (5 digits) listed for the device
in the Preset Code Table using the number buttons (0 –
9) on the remote control.
0 Some manufacturers use more than one type of preset code. Preset codes to
change the number and verify correct operation.
NOTE
0 Depending on the model and year of manufacture of your device, some buttons
may not operate.
Front panel Display
Playback Settings
267
Rear panel
Tips
Remote Index
Appendix