Denon AVR-X4500H Owner's Manual page 238

Contents Connections
Front Speaker
Set the front speaker A/B to use for every sound mode.
A
Front speaker A is used.
(Default):
B : Front speaker B is used.
A+B : Both front speakers A and B are used.
0 This can be set when "Assign Mode" is set to "7.1ch + Front B". (v p. 223)
Front panel Display
Playback Settings
2ch Playback
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
o Setting
Select the method for setting the speakers used in the 2-channel direct
and stereo playback modes.
Auto
(Default):
Manual:
o Front
Set the size of the front speakers for 2-channel playback.
Large
(Default):
Small:
0 When "Speaker Config." - "Subwoofer" in the menu is set to "None", "Large" is
automatically set. (v p. 229)
238
Rear panel
Tips
The settings in "Speakers" are applied.
(v p. 210)
Set the speakers for 2-channel playback.
Make the following settings:
Use a large speaker that can adequately
play back very low bass frequencies.
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
Remote Index
Appendix