Denon AVR-X4500H Owner's Manual page 225

Contents Connections
n Layout
Select the height, ceiling, or Dolby Atmos Enabled speaker location.
The layouts that can be selected differ depending on the combinations of "Assign Mode" and "Floor" - "Layout" in the menu. (" Assign
Mode " (v p. 221), "Floor" - " Layout " (v p. 224))
Height Sp Dolby Sp
None
2ch
4ch
None
z1 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" in the menu.
z2 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
z3 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" and "Floor" - "Layout" is set to "5ch & SB" in the menu.
Front panel Display
Playback
Settings
NOTE
None
None
None
z1
2ch
Rear panel
Settings
Layout
-
Front Height (Default)
Top Front
Top Middle
Top Rear
Rear Height
Front Height & Top Middle
Front Height & Top Rear
Front Height & Rear Heightz2
Front Height & Surr. Height
Top Front & Top Rear
Top Front & Rear Height
Top Middle & Rear Height
Front Dolby
Surround Dolby
Back Dolbyz3
225
Remote
Tips Appendix
AUDIO OUT connectors
HEIGHT 1 HEIGHT 2
- -
Front Height -
Top Front -
Top Middle -
Top Rear -
Rear Height -
Front Height Top Middle
Front Height Top Rear
Front Height Rear Height
Front Height Surr. Height
Top Front Top Rear
Top Front Rear Height
Top Middle Rear Height
Front Dolby -
Surround Dolby -
Back Dolby -
Index