D-Link DSL-2750U User Manual page 69

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
You can specify the following parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Click the Save button.
To edit an existing route, select the needed route in the table. On the opened page, change the
needed parameters and click the Save button.
To remove an existing route, select the needed route in the table. On the opened page, click the
Delete button.
Figure 50. The page for adding a static route.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be
accessed.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the <Auto> value of this drop-down list, the router itself sets
the interface on the basis of data on connected networks.
Page 69 of 110
Configuring via Web-based Interface
Description