D-Link DSL-2750U User Manual page 30

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
On the Static DHCP tab, you can specify MAC address and IP address pairs. The tab is active
when the router's DHCP server is enabled.
To create a MAC-IP pair (set a fixed IP address in the local area network for a device with a certain
MAC address), click the Add button. Then enter the needed IP address and MAC address in the
relevant fields and click the Save button.
Existing MAC-IP pairs are displayed on the Static DHCP tab. To remove a pair, select the
relevant line in the table and click the Remove button. Then click the Save button.
Figure 22. The tab for configuring MAC-IP pairs.
Page 30 of 110
Configuring via Web-based Interface